Now in stock – welded stainless steel fittings.
It has taken many years…about six in fact…BUT Stock Services has finally begun stockholding welded stainless steel fittings.
When we set up our stockholding division ‘Stock Services’ in 2008 we begun with the goal of becoming one of the top three distributors of stainless steel SEAMLESS fittings in the UK. Since then we have developed our range further to include ASME Flanges and more recently EN1092-1 flanges (PN 16/3 and PN 16/8). Our range of seamless fittings and flanges are held in dual certified grades 304/304L and 316/316L, and our accurate stock levels can be found here on our website.
Since moving to larger premises in late 2014, we have taken the next logical step and increased our stainless steel fittings portfolio to include WELDED stainless steel fittings. We can now provide fittings and flanges in one package, and with our experience in distribution, can ship these articles all over the world on quick lead times. Send us your enquiries here.
Stock Services – what are we now holding in stock?
Stock Services carry a range of stainless steel fittings and flanges in our UK-based warehouse. Our range of material is as follows and is shown on our website in full allowing you to request quotations as well as just check stock availability:
- Seamless stainless steel fittings – 90 LR and SR elbows, Concentric and Eccentric Reducers, Reducing and Equal Tees, as well as 45 LR Elbows and End Caps in grades 304/L and 316/L.
- Welded stainless steel fittings – 90 LR Elbows, Concentric Reducers and Equal Tees in grades 304/L and 316/L
- Duplex UNS S31803 Seamless Fittings (UK Origin) – 90 LR and 45 LR Elbows, Concentric and Eccentric Reducers
- ASTM/ASME Flanges – Slip On, Weld Neck and Blind in grades 304/L and 316/L
- EN1092-1 PN16 Flanges – Slip on and Blinds in grades 304/L and 316/L
Click the above links to be taken direct to our website to see stock levels and request a quotation.
Where can I buy non standard stainless steel fittings/flanges?
If you cannot see what you are looking for on our website then please contact us here. It is almost impossible to stock every item of fittings and flanges that are required, but we are very experienced in supplying non standard, large quantities or oversized items on quick lead time from our mills in China. We also have a number of local suppliers that we use to build packages for export, so let us know what you are looking for and we will endeavour to source the material for you.
The below 36 NPS 900# flange was manufactured in under three weeks from our flange mill in China and was subsequently airfreighted to the UK direct to a client in under four weeks.
We also sell large and unusual seamless and welded fittings, often on quick delivery times of 2-3 weeks, so try us out with your enquiries. The below item was manufactured along with about 3 tonnes of other fittings in grade 321. Sch 100 stock material is not commonly held in stock, and the requirement for grade 321 meant our client was struggling to find a suitable supplier to source this material on a short lead time. We managed to have the below material manufactured on a 3 week lead time plus standard delivery into Europe satisfying our customers requirements.
Thanks for reading 😉